TRONEX TECHNOLOGY, INC.

MEDICAL DEVICE MANUFACTURERS VIEW NEW TRONEX CUTTERS

Read more...

FINE HARDWIRE CUTTERS

Standard cutters, sometimes called diagonal cutters, have heads with simple geometry: oval or taper. Oval designs are stronger; taper designs permit greater access. Standard cutters with full relief have lower profiles than cutters with semi-relief. 80% of all applications for precision hand cutting tools are best met with a standard cutter.


Oval	Taper	Miniature Oval	Miniature Taper Relief	Large Oval

Most precision hand cutting tools have cutting edges at a 15 to 20 degree angle so that there is clearance for the operator's fingers on the handles. However a much greater angle may be desired when access to the object being cut is very limited or when the work area is very crowded. Tronex offers angulated cutters at different angles and with different cutting edge sizes to meet a wide variety of needs.


Miniature 50º	Small 50º	Large 50º	Large 50º Pointed	Small 70º	Miniature 90º

Tip cutters are cutting tools with long, narrow jaws that have small, exceptionally sharp edges for cutting at the very tip. All Tronex tip cutters have long jaws for extended reach. Some Tronex tip cutters have lower profiles or have ultra fine cutting tips.


Miniature High Relief	Small	Sub Miniature	Rugged


Miniature Oval	Miniature Taper Relief	50º Thin	50º Wide


Oval	Taper	50°


Standoff	Heavy Duty

All Tronex plier models share two characteristics:
1. A superior jaw in design and craftmanship.
2. The bearing ring joint that is featured with all Tronex precision cutters.


Chain Nose	Chain Nose Short Jaw	Needle Nose	Round Nose	Round Nose Short Jaw	Flat Nose